Hydraulic System Automatic Stator Coil Final Forming Machine PLC Control
Quick Detail:
1. Model No.:Z3XL1-150/160
2. The stator coil final forming machine is used for stator coil final forming,
3. The stator coil final forming machine is driven by the hydraulic system
4. The stator coil final forming machine is controlled by the PLC.
5. The stator coil final forming machine is of highly efficiency and qualified forming.
Technical parameter:
| Stator I.D | 50~100mm |
| Stator O.D | ≤160mm |
| Stack height | 16~100mm |
| Displacement of cylinder | 20F |
| Power supply | 380V/50/60Hz 1.5KW |
| Weight | 700Kg |
| Dimension | 650*900*2300mm |
Description:
The Stator Coil Final Forming Machine is used for stator coil final forming, it is driven by the hydraulic system, controlled by the PLC. The forming machine equipment's tooling design adopts flexible principles of inner expansion. The outer wrapping and edge forming form the stator winding. The stator coil final forming machine can ensure appropriate winding outside dimension after lacing..
Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I.D, stator stack height, and end coil dimension.
Competitive advantages:
It is of highly efficiency and qualified forming. High technology, stable performance and reasonable price.
Regular maintenance
Regularly check if there is water in the filter. If yes, discharge the water.
Regularly check if there is sufficient oil in the atomized lubricator. If not, replenish it.
Regularly check the lubricating condition of guide mechanism, replenish if necessary.
Check and clean up the electrical cabinet once every three months.
Check solenoid valve screws and pipe connectors once every 3 months.
Check filter once every 2 months.
Stator forming machine
Stator final forming machine video
Product Tags:
|
|
Hydraulic System Automatic Stator Coil winding Final Forming Machine PLC Control Images
|
